🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Article View: comp.sys.next.hardware
Article #51

Re: SCIS-2 & FastSCSI

#51
From: Barry Lustig
Date: Thu, 29 Oct 1992 02:42
22 lines
967 bytes
In article <1992Oct28.222856.168@pyrian.com> ian@pyrian.com (Ian H. Stewart) writes:
	What is the difference between these two.
	
	My understanding is that FastSCSI has a trans rate of
	10MB/sec.
	
	At one time I was told they were the same, but the
	my NeXT uses SCSI-2 and it only transfers at something
	like 5MB/sec
	
	Any help is appreciated.
	
SCSI-2 runs at 5MB/sec.  SCSI-2 FAST runs at 10MB/sec.  SCSI-2 FAST &
wide runs at 20MB/sec.  SCSI-2 FAST & double wide runs at 40MB/sec.
The NeXT has a SCSI-2 *connector* on the back.  It is running its bus
at 5.

barry



-- 
Technical Details
Message-ID: <1992Oct29.024203.22742@ictv.com>
Path: arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!pacbell.com!ames!ictv!barry
References: <1992Oct28.222856.168@pyrian.com>

Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.next.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!pacbell.com!ames!ictv!barry
From: barry@ictv.com (Barry Lustig)
Subject: Re: SCIS-2 & FastSCSI
Message-ID: <1992Oct29.024203.22742@ictv.com>
Organization: ICTV, Santa Clara, CA (408) 562-9200
References: <1992Oct28.222856.168@pyrian.com>
Date: Thu, 29 Oct 1992 02:42:03 GMT
Lines: 22