Article View: comp.sys.next.hardware
Article #511Re: Serial Line Config.
From: bruce
Date: Tue, 25 Aug 1992 15:17
Date: Tue, 25 Aug 1992 15:17
19 lines
1315 bytes
1315 bytes
rhamel@netcom.com (Richard Hamel) writes:
: How would I get my NeXT computer to go over the modem line at 8bits, no parity and 1 stop bit?
:
: I need this configuration to connect to some places with my modem, with and without UUCP.
For outgoing calls, it'll depend upon which softare you are using. For incoming
logins, ``stty pass8 pass8out even odd'' should give you a start in the right
direction.
Unfortunately, getty/login have ``csh'' hardcoded as allowing 8-bit logins, and
with an alternate shell you get flipped into 7-bit for your actual login (i.e
we use tcsh at present).
Bruce
--
Bruce Gingery bruce@TotSysSoft.com (Total System Software)
InterNet: Bruce.Gingery@p1.f5.n310.z1.fidonet.org ( Cheyenne, Wyoming )
or bruce@brucext.TotSysSoft.com
NeXT-Mail: bruce@tssnext.rmNUG.org < -or- > bruce@TotSysSoft.com
Technical Details
Message-ID:
<1992Aug25.151732.7293@tssnext.rmNUG.ORG>Path:
arc1-ca.pugleaf.net!sparky!uunet!usc!sol.ctr.columbia.edu!destroyer!ncar!csn!nugget.rmNUG.ORG!tssnext.rmNUG.ORG!bruceReferences:
<z8=ns7q.rhamel@netcom.com>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.next.hardware Path: arc1-ca.pugleaf.net!sparky!uunet!usc!sol.ctr.columbia.edu!destroyer!ncar!csn!nugget.rmNUG.ORG!tssnext.rmNUG.ORG!bruce From: bruce@tssnext.rmNUG.ORG Subject: Re: Serial Line Config. Message-ID: <1992Aug25.151732.7293@tssnext.rmNUG.ORG> Reply-To: <bruce@TotSysSoft.com> (Bruce Gingery) Organization: Total System Software References: <z8=ns7q.rhamel@netcom.com> Date: Tue, 25 Aug 1992 15:17:32 GMT Lines: 19