CH Products RollerMouse

Article View: comp.sys.next.hardware

Article #552

Back to comp.sys.next.hardware Previous Next

#552

From: Tim Reed
Date: Mon, 14 Sep 1992 15:32

18 lines
1295 bytes

I have had a problem with my RolloerMouse from CH Products since it  
was new. It would occasionally stick and could only be freed by  
moving the cursor in other directions very rapidly. This was very  
annoying when it would stick just as I was reaching the location I  
wanted. I called CH Products and explained my problem to one of the  
engineers. He was very sympathetic and interested in solving the  
problem. His best guess is that it was the bearings on the rollers. I  
sent my RollerMouse to him to verify the problem and locate the  
cause. He seemed very concerned at maintaining a quality product. I  
was definitely impressed by his concern to rapidly find and solve the  
problem. If there is interest, I'll update the net when I hear the  
results of his investigation.

--
-----------------------------------
Tim Reed
reed@prism.sps.mot.com
-----------------------------------

Technical Details

Message-ID: <1992Sep14.153205.2258@newsgate.sps.mot.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!spsgate!mogate!newsgate!usenet

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!spsgate!mogate!newsgate!usenet
From: reed@prism.sps.mot.com (Tim Reed)
Subject: CH Products RollerMouse
Message-ID: <1992Sep14.153205.2258@newsgate.sps.mot.com>
Keywords: trakball
Sender: usenet@newsgate.sps.mot.com
Nntp-Posting-Host: 223.190.10.56
Organization: SPS
Date: Mon, 14 Sep 1992 15:32:05 GMT
Lines: 18