Extending Printer Cable

Article View: comp.sys.next.hardware

Article #790

Back to comp.sys.next.hardware Previous Next

#790

From: david.k.kallman
Date: Thu, 08 Oct 1992 21:03

15 lines
836 bytes

Folks,

Has anyone successfully extended the NeXT printer cable
from a NeXTstation to a NeXT laser printer?  If so, what
kind of extender cable did you use?

I tried using a 9 pin cable from our stockroom that I
thought was a straight through cable, but which was not
clearly labeled - so it may not have been straight
through.  I only need to go about an extra 5 feet.

Thanks.

Dave Kallman, AT&T, 480 Red Hill Rd., Middletown, NJ 07748
d_k_kallman@att.com, (908)615-2989, fax: (908)615-2507

Technical Details

Message-ID: <1992Oct8.210316.6125@cbnewsl.cb.att.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!ames!pacbell.com!att-out!cbnewsl!dkk

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!think.com!ames!pacbell.com!att-out!cbnewsl!dkk
From: dkk@cbnewsl.cb.att.com (david.k.kallman)
Subject: Extending Printer Cable
Organization: AT&T Bell Laboratories
Date: Thu, 8 Oct 1992 21:03:16 GMT
Message-ID: <1992Oct8.210316.6125@cbnewsl.cb.att.com>
Lines: 15