Article View: comp.sys.next.hardware
Article #874Attaching third party drives - how?
From: ngan_p
Date: Wed, 14 Oct 1992 17:18
Date: Wed, 14 Oct 1992 17:18
22 lines
1237 bytes
1237 bytes
Our group is looking to add a large hard drive to onto a 040 cube. The drives of interest are: Manufacturer capacity access time Toshiba 1.2 GB 12.5 ms Maxtor 1.2 GB 13 ms Seagate 1.2 GB 16 ms Has anyone successfully used any of these drives? If we are to break new ground, what information regarding the drive do we need to do the job? Does a step-by-step recipe exist for the adding of untried disks? Regards Phillip -- Phillip M Ngan, Research Associate Biomedical Information Communication Center Oregon Health Sciences University 3181 S.W. Sam Jackson Park Road Tel (wk): (503) 494-6056 Portland, OR 97201-3098 Fax: (503) 494-4551 UNITED STATES OF AMERICA Email: nganp@ohsu.edu
Technical Details
Message-ID:
<1bhkopINNsqt@golem.wcc.govt.nz>Path:
arc1-ca.pugleaf.net!sparky!uunet!comp.vuw.ac.nz!newshost.wcc.govt.nz!kosmos.wcc.govt.nz!NGAN_PShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!comp.vuw.ac.nz!newshost.wcc.govt.nz!kosmos.wcc.govt.nz!NGAN_P From: ngan_p@kosmos.wcc.govt.nz Newsgroups: comp.sys.next.hardware Subject: Attaching third party drives - how? Date: 14 Oct 1992 17:18:17 GMT Organization: Wellington City Council (Public Access), Wgtn, Nz Lines: 23 Message-ID: <1bhkopINNsqt@golem.wcc.govt.nz> Reply-To: ngan_p@kosmos.wcc.govt.nz NNTP-Posting-Host: kosmos.wcc.govt.nz