need help installing a Fujitsu 2624FA

Article View: comp.sys.next.hardware

Article #876

Back to comp.sys.next.hardware Previous Next

#876

From: William C. Saphir
Date: Wed, 14 Oct 1992 23:43

20 lines
1025 bytes

I'm trying to install a Fujitsu 2624FA drive on my 
Nextstation. During the boot process, I get:

	FUJITSU NOT READY as sd1 at sc0 target 2 lun 0
	Waiting for drive to come ready

It waits for about 10 seconds and then continues. 
The drive cannot be accessed after the machine boots. 

At the moment, I'm using the factory jumper settings,
except that the synchronous data transfer request is
disabled (and the scsi id is set to 2).  I've also
experimented with scsi1/scsi2, parity, and unit
attention. Same response for all.

Can someone tell me what I'm doing wrong? 
Thanks. 

	Bill Saphir
	wcs@hermes.chpc.utexas.edu

Technical Details

Message-ID: <1992Oct14.234348.14838@chpc.utexas.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!gumby!wupost!news.utdallas.edu!hermes.chpc.utexas.edu!wcs

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.hardware
Path: arc1-ca.pugleaf.net!sparky!uunet!gumby!wupost!news.utdallas.edu!hermes.chpc.utexas.edu!wcs
From: wcs@chpc.utexas.edu (William C. Saphir)
Subject: need help installing a Fujitsu 2624FA
Message-ID: <1992Oct14.234348.14838@chpc.utexas.edu>
Organization: The University of Texas System - CHPC
Distribution: usa
Date: Wed, 14 Oct 92 23:43:48 GMT
Lines: 22