Article View: comp.sys.next.hardware
Article #982Re: NeXT --> Studio3 MIDI Interface Cable
From: Gordon Van Huizen
Date: Sat, 07 Nov 1992 19:42
Date: Sat, 07 Nov 1992 19:42
26 lines
1564 bytes
1564 bytes
In article <9269@blue.cis.pitt.edu.UUCP> cjp+@pitt.edu (Casimir J Palowitch) writes: > > Hi folks, I don't have the tools or skill to make this myself. > Neither does Altex Electronics. They tried, according to the man zs > page pinout scheme which I paste below... but failed. > Contact Worswick Industries in San Diego at 619.571.5400. They built our cable and I believe kept the proper schematic on file. We tried a few of the schematics floating around and found the one that works. If Worswick doesn't have it on file, have them call me and I'll locate which one was used. You might also want to try contacting Opcode. They requested the schematic from us and showed some interest in either stocking the cable or shipping it with new units. By the way, the cable also works with a MOTU MIDI Time Piece II. Gordon -- ---------------------------------------------------------------- Gordon Van Huizen vox: 619.488.9411 fax: 619.488.3045 Metrosoft gvh@metrosoft.com [NeXTmail welcome] ----------------------------------------------------------------
Technical Details
Message-ID:
<1992Nov7.194210.1370@metrosoft.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!psinntp!psinntp!hd0258!gvhReferences:
<9269@blue.cis.pitt.edu.UUCP>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.next.hardware Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sunic!psinntp!psinntp!hd0258!gvh From: gvh@metrosoft.com (Gordon Van Huizen) Subject: Re: NeXT --> Studio3 MIDI Interface Cable Message-ID: <1992Nov7.194210.1370@metrosoft.com> Sender: gvh@metrosoft.com Reply-To: gvh@metrosoft.com (Gordon Van Huizen) Organization: Metrosoft References: <9269@blue.cis.pitt.edu.UUCP> Date: Sat, 7 Nov 1992 19:42:10 GMT Lines: 26