Thread View: comp.sys.next.hardware
1 messages
1 total messages
Started by Scott Denning
Tue, 27 Oct 1992 17:08
Video output from NeXTDimension
Author: Scott Denning
Date: Tue, 27 Oct 1992 17:08
Date: Tue, 27 Oct 1992 17:08
25 lines
1455 bytes
1455 bytes
We've recently started making video tapes of animations produced on a NeXTDimension. The process is simple and painless, but the imagery is pretty fuzzy and flickers in an annoying way. Some have suggested that the ND output contains more lines than a VHS recorder can display (something like 480 vs 330), and that the image quality problems can only be solved by recodring to superVHS. Unfortunately, this would eliminate the portability of the video produced since not all conference rooms, etc, are equipped with S-VHS VCRs. Does anybody know of a way to reduce the distortion or clean up the image quality of VHS recordings made off of the ND? Specifically, we're interested in any way to tweak the ND to produce a VHS-compatible signal to reduce the flicker problem. Thanks for any help. -- A. Scott Denning (303)491-8346 <scott@abyss.atmos.colostate.edu> Dept. of Atmospheric Science Colorado State University Fort Collins, CO 80523
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads