Help needed setting up modem...

Thread View: comp.sys.next.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by RXM40 Thu, 31 Dec 1992 23:04

#1337

Author: RXM40
Date: Thu, 31 Dec 1992 23:04

22 lines
1541 bytes

Greetings....
I have a NeXT turbo color running NS3.0 and I would like to hook
up a modem to it so I could dial in from home.  I am fairly new to the
NeXT environment and I had heard that adding modems to them could be
tricky so I was hoping to get some assistance.  Here are the specifics:
2400 baud hayes compatible
will be dialing into this from home using WinQvt on my PS2
or I will be using kermit.

Are there any programs out there that will do compaction at 2400
baud?  The low speed is a real bummer!!  I will hopefully have a qblazer
slapped onto this in the near future but this is all I have for now.
What I am looking for here is kind of a step-by-step procedure that I
should go through with any warnings that I should be aware of.  Thanks
for your help in advance!!

------------------------------------------------------------------
|      Roderick Murchison, Jr.       |  rxm40@psuvm.psu.edu      |
|  Microcomputer Systems Consultant  |  17 Willard Building      |
|   Center for Academic Computing    |  (814) 863-4356 <office>  |
|       Penn State University        |  (814) 867-1999 <home>    |
------------------------------------------------------------------

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads