🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.next.hardware
1 messages
1 total messages Started by HARRAPR Fri, 01 Jan 1993 14:59
Re: NEC-Intersect CD-ROM drive.....
#1339
Author: HARRAPR
Date: Fri, 01 Jan 1993 14:59
31 lines
1836 bytes
I posted a query a few days ago about the NEC Intersect CD-ROM drive
for the Mac - I wanted to use one on the NeXT. Well, having recieved
no comments except for requests for followups, I bit the bullet and
picked one up (technically the drive is the CD-36 or CDR-36, I think).

I hooked it up to my NeXT, gave it a unique SCSI address, and did a
manual boot to see what was going on. Many, many scsi access errors,
that's what. I tried several id's, tried starting with a disk in,
with no disk in, and so on. The NeXT just ignored the drive, after
initially finding a bunch of errors with it. I strongly suspect that
while this drive uses a SCSI interface on the MAC, it isn't a generic
SCSI device (one clue is that on the box there is a list of alternative
interfaces, one of the others being SCSI-Parallel, whatever that means).

Another possible problem is that this drive doesn't use eject/load, but
instead has a trap door for loading and unloading. Perhaps the NeXT can't
accept drives that don't firmly load and unload? I don't know anything
about hardware (that much is obvious? :<) ), so I'm taking the drive back.

I would appreciate information on a tested CD-ROM drive that is reasonably
inexpensive. Tested on the NeXT, obiously. And no, the PLI is not reasonably
inexpensive at $675 US (about $900 here in the land of perpetual snows).

Thanks in advance,


Rob Harrap
Dept. Geological Sciences
Queen's University
Kingston, Ont.
Harrapr@qucdn.queensu.ca
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads