Re: ROM monitor error --- Solved..Now boot in Multi-user mode.

Thread View: comp.sys.next.hardware

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Gary I. Chang Sun, 10 Jan 1993 05:17

#1547

Author: Gary I. Chang
Date: Sun, 10 Jan 1993 05:17

28 lines
1350 bytes

Hi,

	I do not know how I actually did it, but it works. Now the problem  
are gone forever.

	The bootup process no longer stucks in the ROM monitor.... It  
boots while displaying the spinning disk only. And it goes all the way to  
loginwindow with CD-ROM drive connected....

Here's what I did:

	1. Re-install 3.0 from CD-ROM.....
		bfd CD-ROM tool to boot from CD-ROM Drive, for old NSC. 

	2. re-set parameters in the ROM monitor--- I turn extended  
diagonistic test off and shutdown verbose mode. 

g
P.S. You will lose quite a few thing even if you choose not to erase your  
Hard disk. It took me one day to bring back my SLIP setup and netinfo, as  
well as the userInfo.


--
+----------------+
| Gary I. Chang	 |
+----------------+   
Northwestern Univ.      E-Mail: garyc@eecs.nwu.edu

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads