🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.next.hardware
3 messages
3 total messages Started by Jim Brooking Tue, 12 Jan 1993 18:13
Advice on Seagate Drive
#1590
Author: Jim Brooking
Date: Tue, 12 Jan 1993 18:13
10 lines
762 bytes
Does anyone have anything to say, pro or con, about
the Seagate model ST42400N drive?  We're thinking
about buying one for external use on a server cube.

Thanks!
-- 
jimb@access.digex.com  | (Cage) 1991 323se     ZCP-710   |     Comus Road
Merry Land (MD) U.S.A. | (Bike) 1986 GSXR750    (sold)   |     ClarksBURG
------------------------------------------------------------------------------
Re: Advice on Seagate Drive
#1596
Author: Stephen Anderson
Date: Tue, 12 Jan 1993 22:07
26 lines
1944 bytes
>>>>> On 12 Jan 93 18:13:41 GMT, jimb@access.digex.com (Jim Brooking) said:

	jimb> Does anyone have anything to say, pro or con, about the
	jimb> Seagate model ST42400N drive?  We're thinking about
	jimb> buying one for external use on a server cube.

I have one of these, which I installed as the internal drive in my
cube. It's big, it's fast, and I've had absolutely no trouble with it
so far (apart from the fact that I installed it first with the
termination resistors in backwards, and had to take it out and reverse
them....). It's not as quiet as the old Maxtor, but it's not at all
disturbingly noisy either.

Two comments, though: (a) you'll probably have to pay extra to get a
5-year warranty on the drive, but ask about it. It's not that
expensive, and 5 years is a long time. (b) TheFormatter didn't
understand the drive, so I wasn't able to format it in 1024 byte
sectors. I corresponded with the authors of TheFormatter, who
suggested that if I could get them a copy of the drive tech manual
they could probably get the program to cope with it. I never pursued
this, but now I kind of wish I had, since I'd get about another 120
Mbytes of space on the drive (plus more speed) that way. Perhaps if a
few people are interested, it would be in someobdy's interest to
figure out how to reformat these drives with bigger sectors.

--Steve Anderson
Re: Advice on Seagate Drive
#1598
Author: Nathan F. Janette
Date: Wed, 13 Jan 1993 02:57
23 lines
1483 bytes
In article <1iv1olINNcse@mirror.digex.com> jimb@access.digex.com (Jim  
Brooking) writes:
> 
> Does anyone have anything to say, pro or con, about
> the Seagate model ST42400N drive?  We're thinking
> about buying one for external use on a server cube.

If that's the 1.2 GB model, we had to return one or two due to
either noise problems of media failure.  Our units were
internal units in NeXTcubes, and frankly we suspect that
inadequate ventilation might have been a contributing
factor to the problems, since several Maxtor 1.2 GB
drives have also acted up inside cubes. 

Perhaps it's time for someone to market a second fan for
cubes that would blow filtered air though a replacement
back panel with holes or something... 

--
Nathan Janette
PPP link from hilbert.csb.yale.edu

Please reply to: nathan@laplace.csb.yale.edu (NeXT)
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads