Thread View: comp.sys.next.hardware
2 messages
2 total messages
Started by Todd A Green
Sun, 11 Oct 1992 18:09
Fujitsu 2624 and jumper settings
Author: Todd A Green
Date: Sun, 11 Oct 1992 18:09
Date: Sun, 11 Oct 1992 18:09
25 lines
1448 bytes
1448 bytes
Hello, I'm having a terrible time trying to get my Fujitsu 2624SA drive to work on my NeXTstation color. I had the drive working on a IIcx for about 8 months without a problem, but there are several strange things about the jumper settings. First of all on CNH1 jumper 5-6 was shorted when the drive was on the Mac. According to the drive manual, this meant that that drive was supposedly in diagnostic mode. Well it worked fine (i.e. in normal operation mode). But when I moved it over to the NeXT, I got SCSI parity errors, so I opened that jumper (of course powering down the drive and NeXT first). All other jumpers are shorted except 15-16 which disables synchronous transfers. The problem is that the drive will not spin up unless jumper 5-6 is shorted. (Which on the NeXT does seem to put the drive into a diagnostics mode). Thoroughly confused...thanks for any help, Todd -- NeXTmail: tagreen@cica.indiana.edu
Re: Fujitsu 2624 (mounting Apple formatted drive)
Author: Todd A Green
Date: Sun, 11 Oct 1992 20:43
Date: Sun, 11 Oct 1992 20:43
21 lines
1304 bytes
1304 bytes
In article <BvyyFz.2K4@usenet.ucs.indiana.edu> tagreen@lothario.cica.indiana.edu (Todd A Green) writes: >Hello, > >I'm having a terrible time trying to get my Fujitsu 2624SA drive to >work on my NeXTstation color. > I've figured out the problem. Even though the Fujitsu "Technical Handbook" lables the jumpers from left to right (on p. 3-7), in actuality they are numbered from right to left on the drive (As shown by the diagram on p. 3-5). Also the manual shows CNH7 as only having four pins, my drive has 5. Took a bit of experimenting to get the SCSI id set. FYI, my NeXT did successfully mount the drive as an Apple formatted drive, but it only mounted one partition. Todd -- NeXTmail: tagreen@cica.indiana.edu
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads