Thread View: comp.sys.next.hardware
2 messages
2 total messages
Started by Ton Koelman
Thu, 29 Oct 1992 16:09
spurious DMA interrupt: channel 0x2000110
Author: Ton Koelman
Date: Thu, 29 Oct 1992 16:09
Date: Thu, 29 Oct 1992 16:09
17 lines
1100 bytes
1100 bytes
spurious DMA interrupt: channel 0x2000110 Does anyone ever get this? It seems to coincide with heavy ethernet traffic... Should I start to worry/panic/backup? advice welcome! PS: 64MB/660MB 040 cube 25Mhz with 32MB ND and NeXT CD drive running 2.1. I've done the 3.0 upgrade prep but not the upgrade itself. -- Ton Koelman e-mail: koelman@stc.nato.int (NeXT Mail Welcome!) SHAPE Technical Centre, P.O. Box 174, 2501 CD The Hague The Netherlands (voice: 31-70-3142429, fax: 31-70-3142111)
Re: spurious DMA interrupt: channel 0x2000110
Author: Jeff Hallgren
Date: Fri, 30 Oct 1992 13:02
Date: Fri, 30 Oct 1992 13:02
20 lines
1227 bytes
1227 bytes
In article <1992Oct29.160928.12647@stc.nato.int> koelman@cuby.stc.nl (Ton Koelman) writes: > > spurious DMA interrupt: channel 0x2000110 > > Does anyone ever get this? > It seems to coincide with heavy ethernet traffic... I get the same message. It shows up after about an hour after I power on and seems pretty harmless so far. I'd also like to find out whether it indicates problems or not. PS: 8MB/250MB 25Mhz 040 slab, running 3.0 (swap city) w/ CD drive, and NO ethernet, using SLIP instead. Jeff Jeff Hallgren/Convergent Medical Systems Lab Information Services/University of Minnesota Hospital and Clinic Email: jhall@tahiti.umhc.umn.edu
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads