Printer Offset problems

Thread View: comp.sys.next.hardware

2 messages

[T] Back to Threads [V] Tree View [G] Group Articles

2 total messages Started by e-Floyd B. Hanson UIC Mon, 12 Oct 1992 19:41

#850

Author: e-Floyd B. Hanson UIC
Date: Mon, 12 Oct 1992 19:41

4 lines
579 bytes

The offset on my NeXtPrinter suddenly changed for whatever print jobs I have
tried.  In addition, the test page also comes out badly shifted.

How do I reset the printer offsets for all printing?

Re: Printer Offset problems

#884

Author: Richard Tilley
Date: Thu, 15 Oct 1992 06:53

13 lines
1172 bytes

In <92286.144154U12688@uicvm.uic.edu> e-Floyd B. Hanson,  UIC <U12688@uicvm.uic.edu> writes:

>The offset on my NeXtPrinter suddenly changed for whatever print jobs I have
>tried.  In addition, the test page also comes out badly shifted.

>How do I reset the printer offsets for all printing?

Check that the little green tab on the paper tray is set to "letter".

If that doesn't help, try cutting the Blue wire that attaches to the micro-switches
that the little green tab presses. Leave the Red, Green, and Black wires intact.
-- 
This space is not blank!

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads