Exception #2 (0x0) at 0x10037d4

Article View: comp.sys.next.misc

Article #1045

Back to comp.sys.next.misc Previous Next

#1045

From: mark.d.wuest
Date: Wed, 08 Apr 1992 21:05

14 lines
781 bytes

I just replaced the 8 1 mb simms in my Cube with 4 4 mb parity
simms. When I power on, I get the ROM Monitor with the following message:

Exception #2 (0x0) at 0x10037d4

Before I give up and put the old simms in, can anybody tell me what I am
doing wrong? 

Thanks in advance!

Mark Wuest
mark.wuest@att.com
mdw@trumpet.att.com

Technical Details

Message-ID: <1992Apr8.210519.4710@cbfsb.cb.att.com>

Path:

arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!uwm.edu!linac!att!cbfsb!cbnewsg.cb.att.com!mdw

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!mips!spool.mu.edu!uwm.edu!linac!att!cbfsb!cbnewsg.cb.att.com!mdw
From: mdw@cbnewsg.cb.att.com (mark.d.wuest)
Newsgroups: comp.sys.next.misc
Subject: Exception #2 (0x0) at 0x10037d4
Message-ID: <1992Apr8.210519.4710@cbfsb.cb.att.com>
Date: 8 Apr 92 21:05:19 GMT
Article-I.D.: cbfsb.1992Apr8.210519.4710
Sender: news@cbfsb.cb.att.com
Distribution: usa
Organization: AT&T
Lines: 14