🚀 go-pugleaf

In article <1992Apr15.214121.25820@Princeton.EDU> pjr@splash.Princeton.EDU (Peter Rayner) writes:
>Ok, well I now have a bare disk,thanks to the net and some patience.
>Now I need an enclosure and cables for the thing.  These seem
>surprisingly expensive, $200-300 for single-disk enclosures.  Has
>anybody done significantly better than this?  I am literally immune to
>aesthetics which should help.  
>Oh, the drive is a Wren V so a 60 Watt supply will be ample and the
>cable will be the standard SCSI-1 to SCSI-2 type much used on Nexts,
>Suns etc (I hope).
>Please don't clutter the group with replies since this information is
>necessarily ephemeral (changing all the time).  I will,of course,
>summarize if there's me-too replies.
>-- 
Sorry but this is a generic solution so I'll clutter up the group.

If you are not worried about looks I suggext getting a PC clone case.
A half tower or something along those lines.  They have plenty of drive
drive bays and usually a 200 watt power supply.  All you need to supply
is the cabling for SCSI, there are usually 4 of the standard power cables.

These case work great and give the option of expandability.
--
/*  -The opinions expressed are my own, not my employers.    */
/*      For I can only express my own opinions.              */
/*                                                           */
/*   Kent L. Shephard  : email - kls30@DUTS.ccc.amdahl.com   */