Article View: comp.sys.next.misc
Article #2016Re: Transparencies in 400 dpi NeXT Laser Printer?
From: Dan Shelton
Date: Fri, 11 Sep 1992 00:34
Date: Fri, 11 Sep 1992 00:34
23 lines
1512 bytes
1512 bytes
In article <1992Sep10.233513.15572@menudo.uh.edu> rao@tree.egr.uh.edu (Jagannatha Rao) writes: > > > I seem to remember reading somewhere that we can easily print transparencies in > the NeXT laser printer. Is this correct? IF so, does NeXT mention this anywhere > in their documentation? I could'nt find any reference. > > -- > Jagannatha Rao E-mail:rao@tree.egr.uh.edu > Department of Mechanical Engineering Tel :(713) 743-4535 > University of Houston Fax :(713) 743-4503 You can print transparencies on the NeXT printer by using the manual feed on top of the paper tray and using the manual feed option when you print. You must make SURE that you are using thick transparencies, like ones for copiers or laser printers - best results with the ones for laser printers. If you use the thin transparenices then you can spend time trying to get the plastic off the drum. Dan (dan@ennex1.eng.utsa.edu)
Technical Details
Message-ID:
<1992Sep11.003413.18940@ringer.cs.utsa.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!swrinde!ringer!newsReferences:
<1992Sep10.233513.15572@menudo.uh.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!elroy.jpl.nasa.gov!swrinde!ringer!news From: dan@ennex1.eng.utsa.edu (Dan Shelton) Newsgroups: comp.sys.next.misc Subject: Re: Transparencies in 400 dpi NeXT Laser Printer? Message-ID: <1992Sep11.003413.18940@ringer.cs.utsa.edu> Date: 11 Sep 92 00:34:13 GMT References: <1992Sep10.233513.15572@menudo.uh.edu> Sender: news@ringer.cs.utsa.edu Reply-To: dan@ennex1.eng.utsa.edu (Dan Shelton) Distribution: usa Organization: Univ of Texas at San Antonio Lines: 23 Nntp-Posting-Host: bigh.eng.utsa.edu