Article View: comp.sys.next.misc
Article #2019PC-NeXT connection
From: Fang Zhong
Date: Wed, 12 Aug 1992 23:58
Date: Wed, 12 Aug 1992 23:58
19 lines
1563 bytes
1563 bytes
We are working on PC-NeXT connection for better experiment control and data acquisition. Our final goals would be 1) Use PC to take data files and NeXT to graph them. 2) Let user to use the slider on the NeXT to control the signal sent out by the PC. Therefore, our first step is to mount from PC to NeXT. Both the PC (through Ethernet card) and NeXT are connected to the Dept. network. At the PC site, we are using BWNFS v2.30, and added command "net link NeXT-IP" to the "autoexec.bat"; at the NeXT site, we modified the "exports" file by adding "-access=NeXTname:otherhostname". However, no luck so far. Whenever we reboot the PC, there was always an error message such as "access denied, device M: (the drive we defined) not linked." Is there anything else we should change? Could anyone on the net give us some suggestions? Thank you very much for your help! -- Fang Zhong 1-919-660-2524 Duke University Dept. of Physics fang@phy.duke.edu Durham, N.C. 27706
Technical Details
Message-ID:
<4480@news.duke.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!mips!sdd.hp.com!cs.utexas.edu!sun-barr!ames!stanford.edu!rock!concert!duke!news.duke.edu!phy.duke.edu!fangShow Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!dtix!darwin.sura.net!mips!sdd.hp.com!cs.utexas.edu!sun-barr!ames!stanford.edu!rock!concert!duke!news.duke.edu!phy.duke.edu!fang From: fang@phy.duke.edu (Fang Zhong) Newsgroups: comp.sys.next.misc,comp.sys.next.sysadmin,comp.sys.next.hardware,comp.sys.next.software,comp.sys.ibm.pc.hardware,comp.sys.ibm.pc.misc Subject: PC-NeXT connection Keywords: Help needed Message-ID: <4480@news.duke.edu> Date: 12 Aug 92 23:58:13 GMT Sender: news@news.duke.edu Followup-To: poster Lines: 19 Nntp-Posting-Host: physics.phy.duke.edu