Re: Transparencies in 400 dpi NeXT Laser Printer?

Article View: comp.sys.next.misc

Article #2100

Back to comp.sys.next.misc Previous Next

#2100

From: Anees Munshi
Date: Sat, 12 Sep 1992 23:32

10 lines
826 bytes

I've used 3M's CG3300 transparencies without any problems.
Others may also work, and possibly work better. The one artifact
of this combination is the presence of pin-holes in solid black
areas. Although you can see them if you hold the transparency
up to light, they do not show up on overhead images (because of
the low-resolution of overhead display units).

--
	Anees Munshi, asm@eecg.toronto.edu

Technical Details

Message-ID: <1992Sep12.193218.16078@jarvis.csri.toronto.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!rpi!utcsri!eecg.toronto.edu!asm

References: <1992Sep10.233513.15572@menudo.uh.edu> <1992Sep11.003413.18940@ringer.cs.utsa.edu>

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!gatech!rpi!utcsri!eecg.toronto.edu!asm
Newsgroups: comp.sys.next.misc
From: asm@eecg.toronto.edu (Anees Munshi)
Subject: Re: Transparencies in 400 dpi NeXT Laser Printer?
Message-ID: <1992Sep12.193218.16078@jarvis.csri.toronto.edu>
References: <1992Sep10.233513.15572@menudo.uh.edu> <1992Sep11.003413.18940@ringer.cs.utsa.edu>
Distribution: usa
Date: 12 Sep 92 23:32:18 GMT
Lines: 10

Reply to Parent Message