Thanks all for answering my question about Maxtor SCSI ID

Article View: comp.sys.next.misc

Article #3027

Back to comp.sys.next.misc Previous Next

#3027

From: Gerben Wierda
Date: Wed, 14 Oct 1992 08:23

15 lines
1184 bytes

I got so many reactions to this question that I have to skip personal thanks.
The answer was: The jumpers for these maxtors are on the circuit board of the
drive (hence, the drive has to be removed from the cube, now let's try to find
out how to do this, must be simple) and cannot be seen when you just open the
Cube. The very old Cubes had SCSI ID 0, slightly newer ones (like mine) have
SCSI ID 1.

Thanks again all,


-- 
wierda@ltb.bso.nl (Gerben Wierda) || I speak for myself and not for my employer.
(+31) 2154 84414/(+31) 35 833539  || Support the League for Programming Freedom!
    "If you don't know where you are going, any road will take you there."
    (From the Talmud(?), rephrased in) Lewis Carroll, "Alice in Wonderland".

Technical Details

Message-ID: <2104@ltb.ltb.bso.nl>

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sun4nl!ltb!wierda

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!mcsun!sun4nl!ltb!wierda
From: wierda@ltb.ltb.bso.nl (Gerben Wierda)
Newsgroups: comp.sys.next.misc,comp.sys.next.sysadmin,comp.sys.next.hardware
Subject: Thanks all for answering my question about Maxtor SCSI ID
Message-ID: <2104@ltb.ltb.bso.nl>
Date: 14 Oct 92 08:23:13 GMT
Reply-To: gerben@rna.indiv.nluug.nl
Followup-To: comp.sys.next.misc
Organization: BSO/LT, Baarn, The Netherlands
Lines: 15