Cf. Upgrade 3.0 with new system

Article View: comp.sys.next.misc

Article #3632

Back to comp.sys.next.misc Previous Next

#3632

From: John W. Wooten
Date: Thu, 01 Oct 1992 12:52

24 lines
1407 bytes

I'm a little puzzled by a comparison between what I see on my upgraded  
68040 cube with the upgraded software for 3.0 installed from CDROM  
versus an out of the box new turbo NeXTStation.

I was checking a brand new one out last night and see lots of different  
services for the Librarian, Address Books and Notebooks in the  
~/Library and /NextLibrary locations.  These things don't show up on my  
upgraded system (To my knowledge, I did not elect to omit them).  How  
do I get these new features on my upgraded system.

One minor drawback to the new features, I couldn't seem to get them to  
work very well!

Also, the system installed on the 250 mbyte hard drive delivered has no  
development tools.  I'm getting a 1.2 Gbyte SCSI to use for a  
classroom.  I'll NFS mount it for them and intend to put the  
development software on it.  What is the best arrangement to make this  
seem seamless and easy to manage.  I don't want to have to mess with  
changing Makefiles, etc.



-----------------
J. W. Wooten

Technical Details

Message-ID: <1992Oct1.125252.11112@ornl.gov>

Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!darwin.sura.net!rsg1.er.usgs.gov!ornl!usenet

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.misc
Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!darwin.sura.net!rsg1.er.usgs.gov!ornl!usenet
From: woo@ornl.gov(John W. Wooten)
Subject: Cf. Upgrade 3.0 with new system
Message-ID: <1992Oct1.125252.11112@ornl.gov>
Sender: usenet@ornl.gov (News poster)
Organization: Oak Ridge National Laboratory
Date: Thu, 1 Oct 1992 12:52:52 GMT
Lines: 24