FAXModem, kermit, and how to set my ttys!!!

Thread View: comp.sys.next.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Jon H Bohlke Thu, 23 Jul 1992 15:50

#357

Author: Jon H Bohlke
Date: Thu, 23 Jul 1992 15:50

22 lines
1519 bytes

Ok,
    I have read all of the FAQ's and I am now lost.  I have a ZyXel 14.4kbps modem  
that needs to talk to the serial port at 38.4kbps with hardware flow control.  I  
don't want to do UUCP, I don't want do setup dial in support, all I want is to be  
able to use my modem with kermit to transfer files back and forth.  The problem I  
am having is that the device (/dev/cufa) the modem is connected to is always BUSY  
when I try to add stuff in the /etc/ttys file for it. 

Question #1
   What (if any) modifications do I have to make in my /etc/ttys file?
Question #2
   Can I setup my modem to send FAXs and still use the modem via kermit (more  
device busy problems here)?
Question #3
   How do I use rz sz etc... in kermit, that is using kermit as my interface  
between my modem and my NeXT how do I shell out and use rz (redirects to the device  
don't seem to be working)?

BTW - I have an 68040 NeXT

Jon

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads