Thread View: comp.sys.next.misc
2 messages
2 total messages
Started by Mark T. Dornfeld
Wed, 23 Dec 1992 22:59
Compiling bash on NeXT
Author: Mark T. Dornfeld
Date: Wed, 23 Dec 1992 22:59
Date: Wed, 23 Dec 1992 22:59
16 lines
835 bytes
835 bytes
I have just attempted to compile bash 1.12 on a NS3.0 TC station. All the modules compiled, but the linker spat out: /bin/ld: Undefined symbols: _ulimit *** Exit 1 I'd appreciate any help and if there are other problems I should be watching for, I wouldn't mind being forwarned. Cheers -- Mark T. Dornfeld Voice: (416) 234-9048 CYANTIC Systems Facsimile: (416) 234-0477 101 Subway Crescent Suite 2103 Email: mark@cyantic.com
Re: Compiling bash on NeXT
Author: Chet Ramey
Date: Thu, 24 Dec 1992 05:28
Date: Thu, 24 Dec 1992 05:28
18 lines
1165 bytes
1165 bytes
In article <1992Dec23.225958.21247@cyantic.com> mark@cyantic.com (Mark T. Dornfeld) writes: >I have just attempted to compile bash 1.12 on a NS3.0 TC station. All the >modules compiled, but the linker spat out: > > /bin/ld: Undefined symbols: > _ulimit > *** Exit 1 > >I'd appreciate any help and if there are other problems I should be >watching for, I wouldn't mind being forwarned. Add -DHAVE_RESOURCE to the definition of SYSDEP_CFLAGS or add #define HAVE_RESOURCE in the NeXT entry in machines.h. -- ``The use of history as therapy means the corruption of history as history.'' -- Arthur Schlesinger Chet Ramey, Case Western Reserve University Internet: chet@po.CWRU.Edu
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads