What are the settings for C-Kermit and Supra for 2400 modem?

Thread View: comp.sys.next.misc

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Yeong-Ho Yu Tue, 04 Aug 1992 13:27

#676

Author: Yeong-Ho Yu
Date: Tue, 04 Aug 1992 13:27

22 lines
1488 bytes

I have a NeXT station with a 32bis Supra Fax modem. I am using
C-Kermit 5A. I bought my modem cable from NeXTconnection and belive that
it allows hardware flow control.

After I attach the modem, I tried to connect to a 2400 bps modem and 
succeeded at the first try. The problem was that I did not save the settings 
of C-Kermit or the modem.  Now, I cannot make it work.
I tried many different settings and several times succeeded to connect to 
the other machine -- it either showed CONNECT 9600 or CONNECT 2400. Also,
several times the login prompt appeared.  However, it always appeared with
some garbage characters.  I was never able to type anything and make it
appear on the screen.

So, please sombody send me the detailed settings for both C-Kermit and the 
modem.  I have little experince in using Kermit and modems, so please make
it as detailed as possible.

Please reply to yu@cs.utexas.edu. Many thanks in advance.

Yeong
-------
p.s. I have read NeXT FAQ on modems, tried the instructions, but failed.

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads