🚀 go-pugleaf

I am reposting some of this for clarification:

>   I though it was going to take me longer to get a method out for doing this
>   but the ucl.o file that I had was not the Franz patched file, so it is
>   actually pretty simple as long as you update to the Franz patched ucl.o.
>
>   The following is a procedure for fixing Allegro CL 3.1.20 so that it works
>   under NeXTstep 3.0. I don't have 3.0 so I need someone to try this out and
>   report back to this news group.
>
>     Warning!!! (from Franz) This procedure results in creating a new ucl.o
>     binary file. You may distribute this method but not the resulting ucl.o
>     file. 
>
>     You should find all of the files mentioned here on your ACL distribution
>     floppies. If you do not have the Franz patch mentioned below you will
>     have to ask Franz for it.
>
>           1. You need to patch your existing ucl.o file, if it is not
>              already patched, with an existing patch from Franz. This is
>              done with an existing shell script called
>
>                   install_patch.sh
>
>              and an existing patch file called
>
>                   patch.uu
>
>              To verify that you have done the right thing, after this patch
>              is installed the ucl.o file should be 612364 bytes.

For step (1.), I believe for most of you if you go to your distribution
directory called ACL there is a file called

                dumplispPatch

this is a shell archive file and if you follow the instructions there you
should get the same results, ie. a new ucl.o file resulting in 612364 bytes.
If your existing ucl.o file is already 612364 bytes it probably already had
been patched with the "dump lisp" patch.


--
Bill Vrotney
BAH/Advanced Decision Systems