Re: Help! Help! Palette Problem

Article View: comp.sys.next.programmer

Article #1640

Back to comp.sys.next.programmer Previous Next

#1640

From: Tom Arnow
Date: Mon, 28 Sep 1992 19:49

21 lines
1295 bytes

In article <80490@ut-emx.uucp> tarnow@onyx.cc.utexas.edu (Thomas Arnow)  
writes:
> I had a custom palette under 2.0 
> Now that we have switched to release 3
> InterfaceBuilder cannot read read the old palette. I have tried
> to rebuild it under 3.0. Build was successful but IB still will not
> read it. 
> I could remove the palette - it is a Circular Slider and
> could be replaced with an ordinary slider.
> I cannot even load the nib to remove the palette!
> 
> Any help would be greatly appreciated
> 
> Tom Arnow

I got around the problem by loading version 2.1 IB from Optical, removing  
the palette and resaving the nib. Lucky the project can do without it.
Please note that the original article had a bad return address. This has a  
correct one.
THanks
Tom

Technical Details

Message-ID: <1992Sep28.194924.13624@ringer.cs.utsa.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!gatech!swrinde!ringer!news

References: <80490@ut-emx.uucp>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.programmer
Path: arc1-ca.pugleaf.net!sparky!uunet!haven.umd.edu!darwin.sura.net!gatech!swrinde!ringer!news
From: tom@ennex1.eng.utsa.edu (Tom Arnow)
Subject: Re: Help! Help! Palette Problem
Message-ID: <1992Sep28.194924.13624@ringer.cs.utsa.edu>
Sender: news@ringer.cs.utsa.edu
Nntp-Posting-Host: ennex2.eng.utsa.edu
Reply-To: tom@ennex1.eng.utsa.edu (Tom Arnow)
Organization: Univ of Texas at San Antonio
References: <80490@ut-emx.uucp>
Date: Mon, 28 Sep 1992 19:49:24 GMT
Lines: 21

Reply to Parent Message