Command line access to Websters 3.0

Article View: comp.sys.next.programmer

Article #1808

Back to comp.sys.next.programmer Previous Next

#1808

From: Jeff Wishnie
Date: Wed, 18 Nov 1992 18:43

10 lines
933 bytes

Under 2.0 I used Jiro Nakamura's Define program to define words in
Websters from the command line.

Under 3.0, it looks like the calls Jiro uses (i.e. openReference) have
gone away. Have they been replaced by something or has NeXT intentionally
removed command line
access to references?

Jeff Wishnie
jwishnie@taligent.com

Technical Details

Message-ID: <BxxDCJ.3pB@taligent.com>

Path:

arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!pacbell.com!sgiblab!zaphod.mps.ohio-state.edu!saimiri.primate.wisc.edu!ames!data.nas.nasa.gov!taligent!kip-53.taligent.com!jwishnie

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.programmer
Path: arc1-ca.pugleaf.net!sparky!uunet!charon.amdahl.com!pacbell.com!sgiblab!zaphod.mps.ohio-state.edu!saimiri.primate.wisc.edu!ames!data.nas.nasa.gov!taligent!kip-53.taligent.com!jwishnie
From: Jeff Wishnie <jwishnie@taligent.com>
Subject: Command line access to Websters 3.0
Message-ID: <BxxDCJ.3pB@taligent.com>
Sender: usenet@taligent.com (More Bytes Than You Can Read)
X-Message-Id: <A72FCE825701C1F7@kip-53.taligent.com>
X-Date: Wed, 18 Nov 92 10:42:10 GMT
Organization: Taligent, Inc.
X-Useragent: Nuntius v1.1.1d3
Date: Wed, 18 Nov 1992 18:43:31 GMT
Lines: 10