Allegro Common Lisp

Thread View: comp.sys.next.programmer

3 messages

[T] Back to Threads [V] Tree View [G] Group Articles

3 total messages Started by Anwar Mohammed Mon, 16 Nov 1992 23:54

#1789

Author: Anwar Mohammed
Date: Mon, 16 Nov 1992 23:54

22 lines
1350 bytes

I've copied B. Vrotney's recipe for fixing ACL 3.1.20 to work with
NS 3.0 but I encounter the following error when running config:

...
cc -c static2.c
/bin/ld -x -seg1addr 2000 -headerpad 2000 -seglinkedit -lcrt0.o  -u libsys_s -u libNeXT_s  crt0.o ucl.o  static.o static2.o -lNeXT_s -ldsp -lsys_s -o ucl
/bin/ld: Can't locate file for: -ldsp
*** Exit 1
Stop.

Any idea why?  Presumably many of you have gotten this working already.

Grateful for responses in any form, but e-mail preferred.

thanks,
anwar

-- 
Anwar Mohammed <anwar+@cs.cmu.edu> Vox:(412) 268-3043 Fax:(412) 421-8661
ASAP PhD SCS CMU. "You'll note that politicians no longer spend money,
they invest it.  Don't worry about paying more to the [IRS].  You aren't
being taxed; you're taking a plunge on a fly-by-night stock issue." - P.J.

Re: Allegro Common Lisp

#1793

Author: Anwar Mohammed
Date: Tue, 17 Nov 1992 07:52

19 lines
1355 bytes

In article <Bxu2Fq.7oy.2@cs.cmu.edu> anwar+@cs.cmu.edu (Anwar Mohammed) writes:
>cc -c static2.c
>/bin/ld -x -seg1addr 2000 -headerpad 2000 -seglinkedit -lcrt0.o  -u libsys_s -u libNeXT_s  crt0.o ucl.o  static.o static2.o -lNeXT_s -ldsp -lsys_s -o ucl
>/bin/ld: Can't locate file for: -ldsp
>*** Exit 1
>Stop.
>
>Any idea why?  Presumably many of you have gotten this working already.

OK, so deleting -ldsp fixes the problem....if you don't plan on using the
dsp, I presume.   This is ok for now.  What is the fix for the dsp libraries?

thanks,
anwar
-- 
Anwar Mohammed <anwar+@cs.cmu.edu> Vox:(412) 268-3043 Fax:(412) 421-8661
ASAP PhD SCS CMU. "You'll note that politicians no longer spend money,
they invest it.  Don't worry about paying more to the [IRS].  You aren't
being taxed; you're taking a plunge on a fly-by-night stock issue." - P.J.

Re: Allegro Common Lisp

#1812

Author: Thomas Funke
Date: Tue, 17 Nov 1992 17:21

28 lines
1507 bytes

In article <Bxu2Fq.7oy.2@cs.cmu.edu> anwar+@cs.cmu.edu (Anwar Mohammed) writes:
> I've copied B. Vrotney's recipe for fixing ACL 3.1.20 to work with
> NS 3.0 but I encounter the following error when running config:
> 
> ...
> cc -c static2.c
> /bin/ld -x -seg1addr 2000 -headerpad 2000 -seglinkedit -lcrt0.o  -u libsys_s  
-u libNeXT_s  crt0.o ucl.o  static.o static2.o -lNeXT_s -ldsp -lsys_s -o ucl
> /bin/ld: Can't locate file for: -ldsp
> *** Exit 1
> Stop.
> 
> Any idea why?  Presumably many of you have gotten this working already.
> 

Two tricks will help:

1. remove "-ldsp"
2. or get libdsp.a from a 2.1 and install it under /usr/lib

Then ACL just runs fine under 3.0 :-)


-- 
------------------------------------------------------------------
Thomas Funke  ** E-mail: thf@zelator.in-berlin.de
NeXT-Developer * Unix-Consultant
------------------------------------------------------------------

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads