Article View: comp.sys.next.software
Article #740Re: how to change # of columns in NS2.x send window
From: Gregory J. Sandell
Date: Sat, 15 Aug 1992 18:15
Date: Sat, 15 Aug 1992 18:15
19 lines
1271 bytes
1271 bytes
In article <1992Aug14.044855.17395@unmvax.cs.unm.edu> ctm@ardi.com (Clifford T. Matthews) writes: > Dear Folks, > > While you're waiting for NS3.0 to come out, you can change the > number of columns in a non-NeXTmail window by temporarily making it a > NeXTmail window, using Command-r (Show Ruler), and then setting the > send window back to non-NeXTmail. The ruler remains and you can stretch > it out. > Yes, this works! And I might add that the ruler setting to obtain 80 columns per line is 6 11/16 inches (i.e. just a tad over 6 5/8 inches). Thanks a lot. Nobody else seemed to know of an answer. -- Greg Sandell Research Fellow, Center for New Music and Audio Technologies (CNMAT) sandell@cnmat.cnmat.berkeley.edu
Technical Details
Message-ID:
<16jhj5INN2v8@agate.berkeley.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!agate!usenetReferences:
<1992Aug14.044855.17395@unmvax.cs.unm.edu>Show Full Headers
Complete Article Headers
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!usenet.ins.cwru.edu!agate!agate!usenet From: sandell@chowning.CNMAT.Berkeley.EDU (Gregory J. Sandell) Newsgroups: comp.sys.next.software Subject: Re: how to change # of columns in NS2.x send window Date: 15 Aug 1992 18:15:01 GMT Organization: University of California, Berkeley Lines: 19 Message-ID: <16jhj5INN2v8@agate.berkeley.edu> References: <1992Aug14.044855.17395@unmvax.cs.unm.edu> NNTP-Posting-Host: chowning.cnmat.berkeley.edu