🚀 go-pugleaf

In article <1992Oct24.155954.28852@infko.uucp> droege@infko.uni-koblenz.de  
(Detlev Droege) writes:
> In article <1992Oct21.172218.7845@leland.Stanford.EDU> jay@cmn19.Stanford.EDU  
> (Jay Kadis) writes:
> > 
> > Does anyone know how to get a NeXTDimension board to run under 3.0?  We  
> 
> Should just work. Did so on our ND system.
> 
> > could find no reference to NeXTDimension in the 3.0 upgrade docs, but  
> > there's a specific warning in the install disk that says to only use 2.1.   
> > To make matt 
ers worse, the color monitor crashed and NeXT wants to sell us  
> > a reconditioned one for $100 less than a new one...some help.  We want to  
> > use the RGB or S-video outputs to our Sharp LCD projector and so far it's  
> > no go. Any help would be appreciated!
> 
> The connectors on the NeXTdimension board usually don't carry any signals
> if not told to do so. Especially they don't (and can't) output the
> whole screen image. Start up e.g. ScreenScape from /NextDeveloper/Demos
> to have a part of the ND screen contents output to these connectors.
> By default the visible rectangle of the screen should follow the cursor.
> 
> --
> Detlev Droege                          | droege@infko.uni-koblenz.de
> Universitaet Koblenz,                  |       (NeXTmail ok)
> Institut fuer Informatik               | Voice: +49 261 9119-421
> Rheinau 3-4, D-5400 Koblenz, Germany   | Fax:   +49 261 9119-499

Hello All,

	I have upgraded two ND systems to 3.0 and there was absoulutely no problem.  The manuals say that you should use 2.1 because 2.0 did not have the support for ND.  What I think your problem is is that the computer has somehow reverted back to having the monochrome screen be the login screen.  The only way I know to fix this is to find a monochrome screen and hook it up to the system, instead of the soundbox, switch the login screen to the color and then rehook the soundbox back up.

Good Luck,

Dan (dan@ennex1.eng.utsa.edu)