🚀 go-pugleaf

In the standard print panel, choose the Save button.  When the save 
panel appears there is a pop-up menu at the bottom which defaults to
"Normal device independent PostScript".  Change this to the thrid
item, "Chosen Printer/Include fonts".  This will include your fonts
used inline in the PostScript file.  Keep in mind that this can 
increase the file size many times over, depending on how many fonts
you have used in your document. 

Paul
-- 
--------------------------------------------------------------------------
dCode        | Internet:  dcode@netcom.com    |  (415) 960-3539 

NeXT Mail Happily Accepted

In article <1992Nov3.191806.1630@metrosoft.com> gvh@metrosoft.com (Gordon Van  
Huizen) writes:
> I remember reading somewhere (maybe it was the prelim MeXT docs for 3.0)  
> that when you print to a .ps file in NeXTSTEP 3.0, it will embed any  
> "non-standard" fonts in the .ps file. That way you don't have to worry  
> about what fonts a recipient of the file might have installed on their  
> system.
> 
> I haven't been able to get this to work. Has anyone?
> 
> Gordon
> 
> -- 
> ----------------------------------------------------------------
> Gordon Van Huizen           vox: 619.488.9411  fax: 619.488.3045
> Metrosoft                   gvh@metrosoft.com [NeXTmail welcome]
> ----------------------------------------------------------------

I've used this feature from Appsoft Draw, and I assume that it works with other  
applications.  Be sure to set "Chosen Printer/Include Fonts" from the pull-down  
Save menu.  You also have to install the "chosen printer", and chose it.  It  
all worked fine for me.  (I produced a figure that a friend of mine printed out  
on his color printer; he didn't have the same fonts I did, so I had to include  
them using this method.)

--
Hal.Varian@umich.edu    Hal Varian
voice: 313-764-2364     Dept of Economics
fax:   313-764-2364     Univ of Michigan
                        Ann Arbor, MI 48109-1220

In article <1992Nov4.145453.7004@lsa.umich.edu> Hal.Varian@umich.edu writes:
>In article <1992Nov3.191806.1630@metrosoft.com> gvh@metrosoft.com (Gordon Van  
>Huizen) writes:
>> I remember reading somewhere (maybe it was the prelim MeXT docs for 3.0)  
>> that when you print to a .ps file in NeXTSTEP 3.0, it will embed any  
>> "non-standard" fonts in the .ps file. That way you don't have to worry  
>> about what fonts a recipient of the file might have installed on their  
>> system.
>> 
>> I haven't been able to get this to work. Has anyone?
>> 
>> Gordon
>
>I've used this feature from Appsoft Draw, and I assume that it works with other  
>applications.  Be sure to set "Chosen Printer/Include Fonts" from the pull-down  
>Save menu.  You also have to install the "chosen printer", and chose it.  It  
>all worked fine for me.  (I produced a figure that a friend of mine printed out  
>on his color printer; he didn't have the same fonts I did, so I had to include  
>them using this method.)
>
>--
>Hal.Varian@umich.edu    Hal Varian


How do you install a printer if you don't own a printer?  I'd like to
dump the Postscript fonts along with my document so that I can print
the document on a Postscript printer at school.  I browsed through the
on-line documentation and didn't find the references needed.  When I
try the 'chosen printer/Include Fonts' option it remains
un-highlighted so I can't invoke it.

Thanks,

Shane