Re: bash+3.0

Article View: comp.sys.next.sysadmin

Article #1211

Back to comp.sys.next.sysadmin Previous Next

#1211

From: eric
Date: Sun, 08 Nov 1992 14:24

23 lines
1438 bytes

The automatic configuration script for bash pokes around in the file sytem
looking for assorted `.h' files.  NeXT (in their infinite wisdom) moved
things around so that the files aren't where the configuration script
can find them.

A little tweak to the script and all is well.  Edit the file support/mksysdefs
and look for the two lines that look like:

if [ -f /usr/include/sys/resource.h ]; then
if [ -f /usr/include/sys/wait.h ]; then

and change them to:

if [ -f /usr/include/sys/resource.h -o -f /usr/include/bsd/sys/resource.h ]; then
if [ -f /usr/include/sys/wait.h -o -f /usr/include/bsd/sys/wait.h ]; then

Then the configure script should work and bash should compile and run.
I did this a few weeks ago, so I *hope* I havn't missed anything else. 
--
Eric Norum                     eric@skatter.usask.ca
Research Engineer              phone: (306) 966-6308
Accelerator Laboratory
University of Saskatchewan

Technical Details

Message-ID: <1992Nov8.142415.23486@access.usask.ca>

Path:

arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!caen!destroyer!cs.ubc.ca!unixg.ubc.ca!kakwa.ucs.ualberta.ca!access.usask.ca!news

References: <BxD1C8.IGy@aplcenmp.apl.jhu.edu>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.sysadmin
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!caen!destroyer!cs.ubc.ca!unixg.ubc.ca!kakwa.ucs.ualberta.ca!access.usask.ca!news
From: eric@skatter.usask.ca
Subject: Re: bash+3.0
Message-ID: <1992Nov8.142415.23486@access.usask.ca>
Sender: news@access.usask.ca (USENET News System)
Nntp-Posting-Host: skatter.usask.ca
Organization: University of Saskatchewan
References: <BxD1C8.IGy@aplcenmp.apl.jhu.edu>
Date: Sun, 8 Nov 1992 14:24:15 GMT
Lines: 23

Reply to Parent Message