How to make internal MAXTOR SCSI ID 2 or up...?

Article View: comp.sys.next.sysadmin

Article #1445

Back to comp.sys.next.sysadmin Previous Next

#1445

From: Gerben Wierda
Date: Mon, 12 Oct 1992 15:57

20 lines
1386 bytes

Since CDPlayer.app doesn't work when you have SCSI ID 1 (The internal Maxtor)
and SCSI ID 0 (The external boot disk) both occupied, I'd like to make my
internal disk SCSI ID 2. When I opened the Cube I saw that there were 3
jumpers next to the SCSI connector. One of them has only 1 pin. I have been
told that this (pin 5-6) has to be connected to make a "1". that would make
the others "2" and "3".

Question. Is this "1" hardwired and are therefore only uneven SCSI numbers
available? Can I just put (a) jumper(s) on 3-4 and/or 1-2 thus making "3" or
"5"?

Thanks,

(Or: NeXT: do you have a working CDplayer.app for me?)

-- 
wierda@ltb.bso.nl (Gerben Wierda) || I speak for myself and not for my employer.
(+31) 2154 84414/(+31) 35 833539  || Support the League for Programming Freedom!
    "If you don't know where you are going, any road will take you there."
    (From the Talmud(?), rephrased in) Lewis Carroll, "Alice in Wonderland".

Technical Details

Message-ID: <2101@ltb.ltb.bso.nl>

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!unipalm!uknet!mcsun!sun4nl!ltb!wierda

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!unipalm!uknet!mcsun!sun4nl!ltb!wierda
From: wierda@ltb.ltb.bso.nl (Gerben Wierda)
Newsgroups: comp.sys.next.sysadmin,comp.sys.next.hardware
Subject: How to make internal MAXTOR SCSI ID 2 or up...?
Message-ID: <2101@ltb.ltb.bso.nl>
Date: 12 Oct 92 15:57:31 GMT
Reply-To: gerben@rna.indiv.nluug.nl
Followup-To: comp.sys.next.sysadmin
Organization: BSO/LT, Baarn, The Netherlands
Lines: 20