Re: Desjet and 3,0

Article View: comp.sys.next.sysadmin

Article #1651

Back to comp.sys.next.sysadmin Previous Next

#1651

From: Paul Lynch
Date: Wed, 30 Sep 1992 19:37

21 lines
1280 bytes

In article <dillon.0ojg@overload.Berkeley.CA.US>  
dillon@overload.Berkeley.CA.US (Matthew Dillon) writes:
>     Note that your serial cable to the HP500[C] must be wired properly  
for
>     hardware flow control, and note that the HP500[C] does not use RTS  
for
>     flow control, but DTR.  It's a mess.  I don't know how you would do  
it
>     on a non-turbo machine (which doesn't have hardware flow control).
> 
> 					    -Matt
> 
I do believe that you might be in error.  It's the 030 machine that don't  
do flow control, not the nonTurbo 040s.

Paul
-- 
Paul Lynch
P & L Systems                        (NeXTmail) paul@seer.demon.co.uk
Tel: (0494)671501                           paull@cix.compulink.co.uk
Fax: (0494)680228                            76711.451@compuserve.com

Technical Details

Message-ID: <BvEp6t.MxM@gate.demon.co.uk>

Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!demon!seer.demon.co.uk!paul

References: <dillon.0ojg@overload.Berkeley.CA.US>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.sysadmin
Path: arc1-ca.pugleaf.net!sparky!uunet!pipex!demon!seer.demon.co.uk!paul
From: paul@seer.demon.co.uk (Paul Lynch)
Subject: Re: Desjet and 3,0
Organization: Demon Internet Services.
Date: Wed, 30 Sep 1992 19:37:40 GMT
Message-ID: <BvEp6t.MxM@gate.demon.co.uk>
Originator: paul@seer.demon.co.uk
References: <dillon.0ojg@overload.Berkeley.CA.US>
Sender: news@gate.demon.co.uk (Usenet Administration)
Nntp-Posting-Host: seer.demon.co.uk
Lines: 21

Reply to Parent Message