Re: Printing from clean install of 3.0 causes System Panic (3 times)

Article View: comp.sys.next.sysadmin

Article #1723

Back to comp.sys.next.sysadmin Previous Next

#1723

From: Brian Willoughby
Date: Sat, 03 Oct 1992 07:13

21 lines
1530 bytes

Brian Willoughby writes
| I have tried printing on three occasions, and the system panicked each time.   
| 
| Sep 28 15:58:11 sounds mach: panic: (Cpu 0) No more room in kernel map
| Sep 28 23:58:09 sounds mach: panic: (Cpu 0) No more room in kernel map
| Sep 29 09:39:05 sounds mach: panic: (Cpu 0) No more room in kernel map

I can print now.

My best guess is that my problem may have been due to the fact that I installed  
3.0 without my printer connected (I had moved the machine), and I had never run  
PrintManager.app before I tried printing these three times.  There must be some  
magick in PrintManager, because once I called it up and printed a test page,  
everything seems to be OK.

If my job were testing 3.0, I would attempt to install 3.0 without a printer  
and then try printing without using PrintManager - but that's not my job :-)
-- 
Brian Willoughby	Software Design Engineer, BSEE NCSU
BrianW@SoundS.WA.com	Sound Signal Processing Software and Consulting
NeXTmail welcome	- NO EMAIL SOLICITATION without prior permission

Technical Details

Message-ID: <BvJArA.10L@sounds.wa.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!nwnexus!sounds!brianw

References: <BvIB5y.q3@sounds.wa.com>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.sysadmin
Path: arc1-ca.pugleaf.net!sparky!uunet!nwnexus!sounds!brianw
From: BrianW@SoundS.WA.com (Brian Willoughby)
Subject: Re: Printing from clean install of 3.0 causes System Panic (3 times)
Message-ID: <BvJArA.10L@sounds.wa.com>
Sender: brianw@sounds.wa.com (Brian Willoughby)
Reply-To: BrianW@SoundS.WA.com
Organization: SoundSoftware, Bellevue, WA, USA
References: <BvIB5y.q3@sounds.wa.com>
Date: Sat, 3 Oct 1992 07:13:57 GMT
Lines: 21

Reply to Parent Message