Re: Telebit 3000 Init string for NeXT station Turbo?

Article View: comp.sys.next.sysadmin

Article #2004

Back to comp.sys.next.sysadmin Previous Next

#2004

From: Greg Andrews
Date: Fri, 25 Dec 1992 01:26

26 lines
1340 bytes

cary@aurora.colorado.edu (John R. Cary) writes:
>
>Re:  What is correct setup for Telebit 3000 on a NeXT?
>

The &F3 pre-stored configuration.

>
>I am running NeXT3.0 on a NeXT station turbo.  I bought a Telebit 3000
>and a NeXT hardware handshaking cable and hooked it all up to go, but
>I have no go on dialin.
>
>My configuration works fine on dialout.  I use kermit.
>But on dialin, the login herald never shows up - only a few x's,
>as if a baud rate were incorrect.
>

Set the modem to use the &F3 settings, and set your getty to 19200 bps.

  -Greg
(Telebit Engineer)
-- 
:::::::::::::::::::  Greg Andrews  gerg@netcom.com  :::::::::::::::::::
ObDrieux:  MODERN PROBLEMS: Hi Diddle Diddle, The Cat and the Fiddle,
			    The Cow Blew Up on the Launching Pad
:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::::

Technical Details

Message-ID: <1992Dec25.012639.27222@netcom.com>

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!cs.utexas.edu!wupost!csus.edu!netcom.com!gerg

References: <1992Dec24.034936.1528@colorado.edu>

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.sysadmin,comp.dcom.modems
Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!cs.utexas.edu!wupost!csus.edu!netcom.com!gerg
From: gerg@netcom.com (Greg Andrews)
Subject: Re: Telebit 3000 Init string for NeXT station Turbo?
Message-ID: <1992Dec25.012639.27222@netcom.com>
Organization: Netcom Online Communications Services (408-241-9760 login: guest)
References: <1992Dec24.034936.1528@colorado.edu>
Date: Fri, 25 Dec 1992 01:26:39 GMT
Lines: 26

Reply to Parent Message