Article View: comp.sys.next.sysadmin
Article #2122Re: (HELP) Laser Printer Problem: Thin vertical line appearing on output
From: jiro
Date: Wed, 16 Dec 1992 01:43
Date: Wed, 16 Dec 1992 01:43
24 lines
1355 bytes
1355 bytes
In article <1992Dec11.131407.5627@hot.com> Robert_La_Ferla@hot.com writes: >Recently, I have noticed that all output from my NeXT 400 DPI laser >printer contains a thin vertical line exactly five inches from the left >side of each page. The line extends from the top to the bottom of the >page and is approximately 1/72" wide. > >What is causing this? What is the recommended repair? Robert - Have you cleaned your corona wire? Use a Q-tip or the supplied wand (it comes with your toner cartridge) to clean the corona wire (the toner cartridge usually comes with the instructions where to find it). It *should* fix your problems. Otherwise, you have a dud printer cartridge, the electrostatic roller isn't being electrostatic. A new cartridge should fix *that*. - Jiro -- Jiro Nakamura jiro@shaman.com (NeXTmail) NeXTwatch / Technical Editor 76711,542 (CIS) The Shaman Group +1 607 277-1440 (Voice/Fax)
Technical Details
Message-ID:
<1992Dec16.014318.14408@shaman.com>Path:
arc1-ca.pugleaf.net!sparky!uunet!psinntp!shaman!jiroReferences:
<1992Dec11.131407.5627@hot.com>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.next.sysadmin Path: arc1-ca.pugleaf.net!sparky!uunet!psinntp!shaman!jiro From: jiro@shaman.com Subject: Re: (HELP) Laser Printer Problem: Thin vertical line appearing on output Message-ID: <1992Dec16.014318.14408@shaman.com> Organization: The Shaman Group; A Division of Focal Point Computer, Inc. References: <1992Dec11.131407.5627@hot.com> Date: Wed, 16 Dec 1992 01:43:18 GMT Lines: 24