🚀 go-pugleaf

In article <MAX.92Dec16104919@Kolmogorov.gac.edu>  writes:
> In article <MAX.92Dec16102112@Kolmogorov.gac.edu>
> max@Kolmogorov.gac.edu (Max Hailperin) (yes that's me) writes:
> 
>    [A bunch of stuff about tape read errors that would have been
>     correct, except that I'm brain dead and got "allow" and "inhibit"
>     backwards.]
> 
> The correct mode of operation for restoring from a DAT drive is
> *inhibit* illegal length, *not* allow.  This is what Sears's
> workaround does by using the exabyte device.  The correct solution,
> then, is *not* the mtalill program I posted, but rather the converse,
> which I naturally call mtinill.  This is what I actually run in my
> /etc/rc.local.  Please excuse my earlier error.
> 
[mtinill c program removed]

I made a level 0 dump of my 2.1 system before the 3.0 installation.  I can  
restore -i and cd and ls all around the tape, so I know that restore can  
read the table of contents.  I can add files to the extract list without  
complaints but restore seems to get confused when I say extract.

% mtset -v -i     
setting tape device (/dev/nrst0) to variable block size mode with illegal  
length reporting inhibited
% mtinill
% mt -f /dev/nrst0 rewind
% /usr/etc/restore if /dev/nrst0
restore > ls
.:
 .NeXT/           .macros          NextTour/        lost+found/
 .bindings        .pipedict        bin/             mach
 .commanddict     .profile         brandon/         me/
 .cshrc           LocalApps/       cory/            odmach
 .cshrc~          LocalLibrary/    dev              private/
 .cubxwrc         Mailboxes/       etc              sdmach
 .hidden          Net/             jane/            tmp
 .hidden.org      NextAdmin/       justin/          usr/
 .indent.pro      NextApps/        lib/
 .login           NextDeveloper/   lkb/
 .logout          NextLibrary/     lkbassoc/

restore > cd NextLibrary
restore > ls
./NextLibrary:
 Bookshelves/     Fonts/           Literature/      Packages/
 Documentation/   Images/          Mathematica/     References/
 Fax/             Keyboards/       Music/           Sounds/

restore > cd Literature
restore > ls
./NextLibrary/Literature:
 Shakespeare/

restore > cd Shakespeare
restore > ls
./NextLibrary/Literature/Shakespeare:
 .dir.tiff                         Glossary/
 .index/                           Plays/
 .list                             Sonnets_and_A_Lovers_Complaint/
 .places                           Various_Poems/
 Commendatory_Poems_and_Prefaces

restore > add .dir.tiff
restore > extract
You have not read any tapes yet.
Unless you know which volume your file(s) are on you should start
with the last volume and work towards towards the first.
Specify next volume #: 1
You have read volumes: 1
Specify next volume #: 1
Mount tape volume 1
then enter tape name (default: /dev/nrst0) 
Tape/disk read error while skipping over inode 7
continue? [yn] y
tape is not dump tape
You have read volumes: 1
Specify next volume #: 0
Volume numbers are positive numerics
You have read volumes: 1
Specify next volume #: 2
Mount tape volume 2
then enter tape name (default: /dev/nrst0) 
Tape/disk read error while skipping over inode 7
continue? [yn] y
tape is not dump tape
You have read volumes: 1
Specify next volume #: 
Specify next volume #: .
Volume numbers are positive numerics
You have read volumes: 1
Specify next volume #: ?
Volume numbers are positive numerics
You have read volumes: 1
Specify next volume #: quit
Volume numbers are positive numerics
You have read volumes: 1
Specify next volume #: 1
Mount tape volume 1
then enter tape name (default: /dev/nrst0) 
Tape/disk read error while skipping over inode 7
continue? [yn] n
% 

Here is the unsuccessful result that I get after running mtinill:

% mtinill
% mt -f /dev/nrst0 rewind
% /usr/etc/restore xf /dev/nrst0  
./NextLibrary/Literature/Shakespeare/.dir.tiff
You have not read any tapes yet.
Unless you know which volume your file(s) are on you should start
with the last volume and work towards towards the first.
Specify next volume #: 1
You have read volumes: 1
Specify next volume #: 1
Mount tape volume 1
then enter tape name (default: /dev/nrst0) 
Tape/disk read error while skipping over inode 7
continue? [yn] n
% 

Any ideas?

PS. I'm NOT really trying to get that tiff, it's just an example!

-- 
Larry Blische              uunet!lkba!lkb
LKB Associates, Inc.
3118 Dunglow Road
Dundalk, Maryland 21222-5304 USA