Backup to DAT

Article View: comp.sys.next.sysadmin

Article #43

Back to comp.sys.next.sysadmin Previous Next

#43

From: Nancy J Huebner
Date: Fri, 30 Oct 1992 15:05

11 lines
939 bytes

We have connected an HP6400/2000 DAT drive to one of our NeXT to backup our
network. It is connected to the SCSI port as #3.  We are told that we should
use /dev/rxt0 in the cpio command however it doesn't work.  We have tried to
use the mt command with the status option and it says no such device or         
address.

Does anyone have any suggestions on what device we should be using?

Thanks in advance.

Nancy J. Huebner (njh@kiwi.swhs.ohio-state.edu) NeXTMail accepted.

Technical Details

Message-ID: <1992Oct30.150531.13088@magnus.acs.ohio-state.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!caen!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!nhuebner

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.sysadmin
Path: arc1-ca.pugleaf.net!sparky!uunet!caen!zaphod.mps.ohio-state.edu!magnus.acs.ohio-state.edu!nhuebner
From: nhuebner@magnus.acs.ohio-state.edu (Nancy J Huebner)
Subject: Backup to DAT
Message-ID: <1992Oct30.150531.13088@magnus.acs.ohio-state.edu>
Sender: news@magnus.acs.ohio-state.edu
Nntp-Posting-Host: top.magnus.acs.ohio-state.edu
Organization: The Ohio State University
Date: Fri, 30 Oct 1992 15:05:31 GMT
Lines: 12