ZyXEL : How does one adjust DTE rate for incoming calls ?

Article View: comp.sys.next.sysadmin

Article #57

Back to comp.sys.next.sysadmin Previous Next

#57

From: Ernst Kloecker
Date: Sat, 31 Oct 1992 12:41

25 lines
1447 bytes

Hi,

I am using a ZyXEL 1496E+ as a dial-in modem into my Unix box. It took me
quite a while, until people were able to log in, because the getty on my
Unix machine (NeXT) is a bit brain dead (it can't detect the baud rate
automatically). So I had to try all available baud rates until finally
38400 worked fine.

But how come the ZyXEL initiates the communication with 38400 ? I never
told it to do so and I don't know how to, either. I know about the 
AT&B0 setting, but that only locks the DTE rate and does not set it.
And I also cannot set the register S20 manually !

Does anybody know how to set the DTE rate for incoming calls ?

Or is there a better getty for the NeXT ?


Thanks for any info, Ernst.

--

-----------------------------------------------------------------------------
Ernst Kloecker      phone: ++49-30-6181635      e-mail: ernst@cs.tu-berlin.de
-----------------------------------------------------------------------------

Technical Details

Message-ID: <1992Oct31.124117.2323@cs.tu-berlin.de>

Path:

arc1-ca.pugleaf.net!sparky!uunet!wupost!darwin.sura.net!spool.mu.edu!nigel.msen.com!math.fu-berlin.de!mailgzrz.TU-Berlin.DE!cs.tu-berlin.de!ernst

Show Full Headers

Complete Article Headers

Newsgroups: comp.sys.next.sysadmin
Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!darwin.sura.net!spool.mu.edu!nigel.msen.com!math.fu-berlin.de!mailgzrz.TU-Berlin.DE!cs.tu-berlin.de!ernst
From: ernst@opal.cs.tu-berlin.de (Ernst Kloecker)
Subject: ZyXEL : How does one adjust DTE rate for incoming calls ?
Message-ID: <1992Oct31.124117.2323@cs.tu-berlin.de>
Sender: news@cs.tu-berlin.de
Organization: Techn. University of Berlin, Germany
Date: Sat, 31 Oct 1992 12:41:17 GMT
Lines: 25