Using a NeXT as an Ethernet converter

Article View: comp.sys.next.sysadmin

Article #594

Back to comp.sys.next.sysadmin Previous Next

#594

From: Douglas Scott
Date: Wed, 15 Apr 1992 23:13

14 lines
993 bytes

Is it possible to use a NeXT to convert a twisted-pair ethernet connection to  
the other format (I forget its name) via the following hookup:

==================>  NeXT  ---------------------->  machine with BNC connector
(twisted pair in)         (out from BNC connector)
                          (terminated correctly of course)

Thanks.

--
Douglas Scott                              (805)893-8352
Center for Computer Music Research and Composition
University of California, Santa Barbara
Internet: (NeXTMail ok)   <doug@foxtrot.ccmrc.ucsb.edu>

Technical Details

Message-ID: <4195@ucsbcsl.ucsb.edu>

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!sdd.hp.com!network.ucsd.edu!ucsbcsl!foxtrot.ccmrc.ucsb.edu

Show Full Headers

Complete Article Headers

Path: arc1-ca.pugleaf.net!sparky!uunet!zaphod.mps.ohio-state.edu!sdd.hp.com!network.ucsd.edu!ucsbcsl!foxtrot.ccmrc.ucsb.edu
From: doug@foxtrot.ccmrc.ucsb.edu (Douglas Scott)
Newsgroups: comp.sys.next.sysadmin
Subject: Using a NeXT as an Ethernet converter
Keywords: ethernet
Message-ID: <4195@ucsbcsl.ucsb.edu>
Date: 15 Apr 92 23:13:40 GMT
Sender: root@ucsbcsl.ucsb.edu
Reply-To: doug@foxtrot.ccmrc.ucsb.edu
Distribution: usa
Lines: 14