Article View: comp.sys.next.sysadmin
Article #837Re: uucp "permission denied"
From: bruce
Date: Sun, 30 Aug 1992 19:51
Date: Sun, 30 Aug 1992 19:51
23 lines
1650 bytes
1650 bytes
pete@othello.dartmouth.edu (Pete Schmitt) writes:
: Trying to use the uucp command to send a file to another
: system over a modem, and I keep getting permission denied error, even
: if the file is set to mode 777. What am I doing wrong?
:
: -pete
: --
: Peter Schmitt, UNIX Systems Specialist, Computing Services, Dartmouth College
: Email: peter.schmitt@dartmouth.edu Phone: 603-646-2085
: ******* Let us not give up meeting together, as some are in the habit *******
: ******* of doing, but let us encourage one another. -Hebrews 10:25 *******
I believe you'll find that sends from a directory accessable to both uucp
and the file's owner will work. Perhaps /usr/spool/uucppublic ? The mode of
the directory was likely NOT set to 777 in your testing (and at least an execute
permission to uucp for all above it in the tree-path as specified).
Bruce
--
Bruce Gingery bruce@TotSysSoft.com (Total System Software)
InterNet: Bruce.Gingery@p1.f5.n310.z1.fidonet.org ( Cheyenne, Wyoming )
or bruce@brucext.TotSysSoft.com
NeXT-Mail: bruce@tssnext.rmNUG.org < -or- > bruce@TotSysSoft.com
Technical Details
Message-ID:
<1992Aug30.195150.4459@tssnext.rmNUG.ORG>Path:
arc1-ca.pugleaf.net!sparky!uunet!wupost!sdd.hp.com!usc!sol.ctr.columbia.edu!destroyer!ncar!csn!nugget.rmNUG.ORG!tssnext.rmNUG.ORG!bruceReferences:
<1992Aug29.000318.15568@dartvax.dartmouth.edu>Show Full Headers
Complete Article Headers
Newsgroups: comp.sys.next.sysadmin Path: arc1-ca.pugleaf.net!sparky!uunet!wupost!sdd.hp.com!usc!sol.ctr.columbia.edu!destroyer!ncar!csn!nugget.rmNUG.ORG!tssnext.rmNUG.ORG!bruce From: bruce@tssnext.rmNUG.ORG Subject: Re: uucp "permission denied" Message-ID: <1992Aug30.195150.4459@tssnext.rmNUG.ORG> Reply-To: <bruce@TotSysSoft.com> (Bruce Gingery) Organization: Total System Software References: <1992Aug29.000318.15568@dartvax.dartmouth.edu> Date: Sun, 30 Aug 1992 19:51:50 GMT Lines: 23