SCSI messages during bootup

Thread View: comp.sys.next.sysadmin

1 messages

[T] Back to Threads [V] Tree View [G] Group Articles

1 total messages Started by Daniel Shelton Mon, 12 Oct 1992 18:17

#1446

Author: Daniel Shelton
Date: Mon, 12 Oct 1992 18:17

19 lines
1721 bytes

Hello All,

	I recently upgraded one of our cubes to 40MB RAM (8 4MB chips, 80ns and 8 1MB chips, 100ns).  This machine is an upgraded 030 
 
 with a 600MB external and internal and has a ND in (we are running two headed).  When I tried to reboot the machine after the memory upgrade, I got the message 

		SCSI:msgout phase

over and over and the machine would not boot.  Also, the machine would lock up frequently on users whose accounts were on that machine but the machine would work fine for users whose accounts are not on the machine.  This seems to be an intermittent problem.  I reseated all the cables and the samething.  Has anybod 
 
y seen this problem before and does anybody know what causes this?

Thanks for any information,

Daniel Shelton (dan@ennex1.eng.utsa.edu)rade, I got the message 

		SCSI:msgout phase

over and over and the machine would not boot.  Also, the machine would lock up frequently on users whose accounts were on that machine but the machine would work fine for users whose accounts are not on the machine.  This seems to be an intermittent problem.  I reseated all the cables and the samething.  Has anybod

Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads