🚀 go-pugleaf

RetroBBS NetNews Server

Inspired by RockSolid Light RIP Retro Guy

Thread View: comp.sys.next.sysadmin
1 messages
1 total messages Started by Comrade D Wed, 30 Sep 1992 22:46
Can't dial in (SUMMARY)
#1659
Author: Comrade D
Date: Wed, 30 Sep 1992 22:46
66 lines
2616 bytes
Thanks to those (John, Jim, Mark, Bernhard) who responded
to my post.  Unfortunately, I had no luck getting dial-in
to work with my DoveFax modem.  I originally asked this:

>  Very basic question...  I'm having no luck configuring
>  my NeXTcube under 2.1 and DoveFax for dial-in (dial-out
>  works fine).
>  
>  I followed Mark Adler's modem.setup notes with no luck.
>  Also checked through NeXTanswers, the SysAdmin manuals,
>  etc...
>  
[ parts deleted ]
>  
>  I'm not sure what to look for, but it isn't consistent
>  in any case.  After I "KILL -HUP 1" it starts out with
>  a getty process, like so:
>  
>    536 ?  U     0:00 - D2400 ttyda (getty)
>  
>  Then a new process appears like so:
>  
>    536 da S     0:00 login -p n:
>  
>  Sometimes the login looks like:
>  
>    190 da S     0:00 login -p carrier
>  
>  or
>  
>    190 da S     0:00 login -p in:
>  
>  And then the getty process disappears.  Very often no
>  connection occurs.  When the connections do occur the
>  login prompt (I assume) appears just as garbage, as if
>  maybe the parity was wrong.
>  
>  In the console window I get:
>  
>  Sep 18 10:18:02 angst mach: zs0: recv buffer overrun Sep
>  18 10:18:04 angst login: 1 LOGIN FAILURE ON ttyda, in:
>  Sep 18 10:18:10 angst login: 1 LOGIN FAILURE ON ttyda,
>  rd:

John Robison (john@oceania.com), Jim Chorn
(onion.rain.com!nestmoi!jim), Mark Adler
(cco.caltech.edu!madler), and Bernhard Nocker
(bnocker@cosy.sbg.ac.at) all suggested the problem was due
to modem echo, some saying it could be caused by a bad
cable.  Jim suggested I try the ATE0 command to turn off
local echo.  Bernhard sent me the modem profiles (with the
AT&V command) that might work.

Unfortunately, I can't do anything about it if the cable is
to blame.  The DoveFax's cable is an unconnectable part of
the unit.  I tried the ATE0 and suggested modem profiles,
with no luck.  I'm starting to think I need to save up and
get a ZyXEL...

Meanwhile, has ANYONE out there got a DoveFax modem setup
for dialin successfully?


-------------------------------------------------------------------
Dylan Kohler
dylan@angst.com     (NeXTmail welcome)
Thread Navigation

This is a paginated view of messages in the thread with full content displayed inline.

Messages are displayed in chronological order, with the original post highlighted in green.

Use pagination controls to navigate through all messages in large threads.

Back to All Threads