Thread View: comp.sys.novel
2 messages
2 total messages
Started by Joe LaRocque
Fri, 21 Aug 1992 14:28
Unexpected Errors with Paradox on Novel
Author: Joe LaRocque
Date: Fri, 21 Aug 1992 14:28
Date: Fri, 21 Aug 1992 14:28
22 lines
958 bytes
958 bytes
We are having some problems in running Paradox 3.5 on a Novell 3.1 network. When executing Paradox we sometimes receive 'unexpected errors' and are dropped back to DOS. The error codes we are seeing are: 1. 4C7CGP0057 2. 0492GP14D7 3. 02E6GP00FF or 4. 469DGP1B57 These errors appear on either a 386SX PC or a Dell 486DX. If anyone could explain why these error codes are occuring, or how to prevent them, we would owe them our undying gratitude. Thanks in advance for the assistance. Joe La Rocque joe@eng3.sci.com SCI Huntsvile, AL
Re: Unexpected Errors with Paradox on Novel
Author: Aahzmandius
Date: Mon, 24 Aug 1992 03:13
Date: Mon, 24 Aug 1992 03:13
26 lines
1381 bytes
1381 bytes
In article <1992Aug21.142816.9227@eng3.sci.com> joe@eng3.sci.com (Joe LaRocque) writes:
>We are having some problems in running Paradox 3.5 on a Novell 3.1 network.
>When executing Paradox we sometimes receive 'unexpected errors' and are
>dropped back to DOS. The error codes we are seeing are:
>
> 1. 4C7CGP0057
> 2. 0492GP14D7
> 3. 02E6GP00FF
> or
> 4. 469DGP1B57
The info from Borland tech support is that the "GP" in the middle stands
for "General Protection fault", which is an abort signal from the
processor after an illegal memory address. The two four-digit hex
numbers on each side are the address itself.
Essentially the numbers are meaningless without knowledge of what steps
occurred before the error. Supposedly, running with the -real option
can report better error messages.
--
--- Aahz (the *other* Dan Bernstein)
@netcom.com
Hugs and backrubs -- I break Rule 6
So much Astroglide. So little time.
Thread Navigation
This is a paginated view of messages in the thread with full content displayed inline.
Messages are displayed in chronological order, with the original post highlighted in green.
Use pagination controls to navigate through all messages in large threads.
Back to All Threads