Article View: comp.sys.novell
Article #5929Plotter printing problems and Netware
From: Sheri K Cummings
Date: Thu, 28 Jan 1993 17:35
Date: Thu, 28 Jan 1993 17:35
15 lines
1282 bytes
1282 bytes
Our department just switched from LanManager to Netware 3.11. We have set up a dedicated workstation as a print server, and connected a HP 7600 series model 355 plotter to it (LPT1 parallel). Users sending print jobs from Autocad 11 are experiencing problems. Parts of the drawing may be ommitted or in the wrong place. We set the Time Out option in the capture to 25 seconds and disabled the Autoendcap feature. These changes didn't help. The plotting errors don't occur each time. They may plot the same drawing three times and get a good one on the third try. Should we have a printer definition for the plotter set up in the Printdef database? We went with the defaults when setting up the plotter in Pconsole. Any suggestions would be much appreciated. Sheri Cummings Iowa State University 515-294-0207 Ames, IA 50011 skcummi@iastate.edu
Technical Details
Message-ID:
<C1KrJt.CuL@news.iastate.edu>Path:
arc1-ca.pugleaf.net!sparky!uunet!gumby!destroyer!news.iastate.edu!skcummiShow Full Headers
Complete Article Headers
Newsgroups: comp.sys.novell Path: arc1-ca.pugleaf.net!sparky!uunet!gumby!destroyer!news.iastate.edu!skcummi From: skcummi@iastate.edu (Sheri K Cummings) Subject: Plotter printing problems and Netware Message-ID: <C1KrJt.CuL@news.iastate.edu> Sender: news@news.iastate.edu (USENET News System) Organization: Iowa State University, Ames, IA Date: Thu, 28 Jan 1993 17:35:52 GMT Lines: 15