🚀 go-pugleaf

In <31E9CFFC.6C0E@fastlane.net>, Darwin Collins <dcollins@fastlane.net> writes:
>Kinda sounds like hardware.   Namely, sometype of 'thermal' problem.
>
>good luck
>
>-- 
>From: Darwin Collins   Email: dcollins@fastlane.net
>HomePage: http://www.fastlane.net/homepages/dcollins
>NDS utilities and links to support and utility pages.


--------------------
Here's a followup to my previous post.  This is  listed as a TIP on page 500
of the CNE 4.1 Study Guide:

	"When you purchase a CD-ROM drive, make sure that it can also be
	used as a NetWare device.  This is made possible using the CD-ROM 
	NLM from MetWare 4.  Make sure that the CD-ROM is installed on a
	SEPARATE SCSI adapter from that being used by the hard drive, because
	Netware 4 sometimes hangs if the CD-ROM drive and hard disk are
	attached to the same adapter."

I have had this happen but more than likely, the 'tag_disable' switch is more
likely to resolve your problem with the Adaptec controller and Quantum drive
than the above quote.  I only mention the above as a tidbit of info in case
my other suggestion (barring outright hardware problems) leaves you scratching
your head on exactly what will resolve the issue.
--------------------
George Fliger
PC Repair of Florida
gfliger@acun.com
http://www.acun.com/~gfliger