🚀 go-pugleaf

In <3uj59e$so8@info4.rus.uni-stuttgart.de>
fabt2291@ikesg1.energietechnik.uni-stuttgart.de (Oliver Kretzschmar)
writes: 
>
>Hey,
>
>we have Novell 4.1 running and have installed in our EISA computer 64
MB ram.
>But in the monitor program of NOVELL (load monitor) under Resource
Utilization
>we see as working memory only 32 MB. We have set the option above16 to
ON.
>If we start the computer you can see counting bios to 64 MB. How can
we use
>the full 64 MB on the NOVELL 4.1 server. Please mail me your
informations !
>
>Thanks a lot,
>
>	Oliver
>
>-- 
> NAME : O.Kretzschmar                      Inst.IKE / University
Stuttgart
> PHONE: +49 711 685 2130                           Pfaffenwaldring 31
> FAX  : +49 711 685 2010                            7000 Stuttgart 80
> EMAIL: kretzschmar@ike.uni-stuttgart.de


Oliver;

Netware 4.x would automaticallay read your correct amount of RAM in an
EISA system.  You need to go to your EISA system configuration and
change your RAM configuration from 32 megs to 64 megs.  Remeber setting
your RAM in EISA conguration and your CMOS are two different things. 
Good luck.

-- 


					Iraj T
					iraj2@ix.netcom.com