🚀 go-pugleaf

Thanks to all who responded to my posting about the problems I
was having getting Charon2.0A running on my NW3.11.

The basic gist of the problem I was having is as follows:
	I went through all the installation procedures and
	prepared to gateway jobs from a NW queue to a remote
 	printer on a UNIX host.  I named the print server LPR
	and the print queue PS1.  I also created an account which
	would get logged into and then start up the Charon2.0A
	software.  When the program was run, I would see the
	following message:
		Info: Adding Queue (1e000001) CNADNW2/ps1 --> iowa:ps1
		Info: Attaching to Queue CNADNW2/ps1
		Warning: Attach failed with error ea for Queue CNADNW2/ps1,
			unlinking
		Press <SPACEBAR> To Continue...


I got several respsonses and all touched on one or more of the adjust-
ments I needed to make.  I will outline the adjustments to my set up
that got things working.  Many of these are specific to running
Charon2.0A on NW3.11 since that version of Charon was originally
designed for NW2.x.

0) Perform all installation procedures described in the user's
	guide.

1) Do not use non-alphabetic characters (i.e. no numbers) in the
	print queue names.

2) Go back into pconsole and for each print queue, define the
	print server you created as a QueueServer for that queue.

3) Allow unencrypted passwords--at the system console
	:SET ALLOW UNENCRYPTED PASSWORDS=ON

4) Start charon.exe from a local disk instead of creating an account
	to log into that starts charon.exe.

5) Use the -u option of charon.exe

6) The order of the arguments to charon.exe seem to make a difference.


Hope this helps someone out!
-- 
| Cornell Kinderknecht          Email: cornell@csl.dl.nec.com |
| CNAD/CCSL                      UUCP: uunet!necbsd!cornell   |
| NEC USA/NEC America, Inc.     Phone: 214-518-3509           |
| Irving, TX                      Fax: 214-518-3552           |